CCJTZ - 55WL ENAMEL NONFLAMING CHLORINATEDALKYD SEMIGLOSS SOFT WHITE
- MSDS: CCJTZ
- Manufacturer: VAN PATTEN LYLE CO INC
- Product Name: 55WL ENAMEL NONFLAMING CHLORINATEDALKYD SEMIGLOSS SOFT WHITE
- National Stock Number: 8010-00-577-4739
Product Identification
Product ID:55WL ENAMEL NONFLAMING CHLORINATEDALKYD SEMIGLOSS SOFT WHITE
MSDS Date:10/10/1994
FSC:8010
NIIN:00-577-4739
MSDS Number: CCJTZ
Responsible Party
LOS ANGELES, CA 90061-1001
US
Emergency Phone: 213-321-3681/321-8090
Info Phone: 213-321-3681/321-8090
Preparer: LYLE VAN PATTEN
Cage: 33291
Contractor
Cage: 33291
Ingredients
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
ACGIH TLV: 5 MG/M3 AS DUST
BARYTES
CAS: 7727-43-7
RTECS: CR0600000
ACGIH TLV: 10 MG/M3 AS DUST
MINERAL SPIRITS
CAS: 64742-47-8
ACGIH TLV: 125 PPM 8 HR
VOC = 350 G/L, 4.1 LBS/GL
RTECS: 9999999VO
Fraction By Weight: NA
OSHA PEL NOT RELEVANT
ACGIH TLV: NOT RELEVANT
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF HIGH CONCENTRATIONS MAY
CAUSE TEMPORARY DIZZINESS/HEADACHES/NAUSEA RANGING FROM
CONVULSIONS/LOSS CONSCIOUSNESS. SYMPTOMS GENERALLY DISAPPEAR WHEN
EXPOSURE CEASES.
Effects of Overexposure:TEMPORARY DIZZINESS, HEADACHE, NAUSEA. RANGING
FROM CONVULSIONS, LOSS OF CONSCIOUSNESS. SYMPTOMS GENERALLY
DISAPPEAR WHEN EXPOSURE CEASES.
First Aid
First Aid:INHALATION: MOVE TO FRESH AIR IMMEDIATELY. CALL DR IF
BREATHING IRREGULAR/STOPPED START ARTIF RESP. GIVE OXYGEN. WASH
EYES W/WATER. REMOVE CONTAM CLOTHES. WASH SKIN THOROUGHLY.
Fire Fighting
Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, FOG.
Fire Fighting Procedures:USED AIR-SUPPLIED RESCUE EQUIPMENT FOR
ENCLOSED AREAS. COOL CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES & PROVIDE
VENTILATION. LARGE SPILLS MAY BE SCOOPED UP W/NONSPARKING TOOLS.
AVOID BREATHING VAPORS. GIVE RESP PROTECTION IF REQ. SMALL AMTS MAY
BE PICKED UP W/DRY ABSORBENT.
Handling
Handling and Storage Precautions:AVOID CHRONIC BREATHING OF VAPORS/SKIN
CONTACT. RESIN ACCUMULATION (SPRAY/BOOTH CLEANINGS) MAY
SPONTANEOUSLY IGNITE. IMMERSE ACCUMULATIONS IN WATER.
Exposure Controls
Respiratory Protection:HYDROCARBONS OR ORGANIC VAPOR CANISTER, SUPPLIED
W/AIR MASK.
Ventilation:LOCAL EXHAUST. USE ADEQUATE VENTILATION.
Protective Gloves:NEOPRENE OR PLASTIC
Eye Protection:CHEMICAL SPLASH GOGGLES/FACE SHIELD.
Work Hygienic Practices:KEEP OFF OF SKIN, HANDS & FACE.
Supplemental Safety and Health
NK
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:316 TO 380F
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:22.0
Vapor Density:>AIR
Spec Gravity:1.734
Evaporation Rate & Reference:0.2 (BUAC=1)
Solubility in Water:SLIGHT
Appearance and Odor:WHITE COLOR, MINERAL SPIRITS ODOR
Stability
Stability Indicator/Materials to Avoid:YES
OXYGEN OR STRONG OXIDENTS WILL DISOLVE OR SOFTEN SOME PLASTICS OR
RUBBER.
Stability Condition to Avoid:HIGH TEMPERATURES OR HEAT.
Disposal
Waste Disposal Methods:PLACE IN CLOSED CONTAINERS. RAGS/ABSORBENTS
SHOULD BE IMMERSED IN WATER. USE SANITARY LANDFILLS ACCORDING TO
LOCAL, STATE, FEDERAL REGS. RUN-OFF TO WATERWAYS CREATES FIRE
HAZARD. NOTIFY FIRE/HEALTH AG ENCIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.